Audi 05-13 (Non-BOSE) CANBUS steering wheel control and amplifier interface
£89.99 – £105.99
Part Number: SWC-SS-AUD3
CANBUS Interface and ISO cables allowing use of original steering wheel control buttons with a new aftermarket radio head-unit including an interface for rear amplified speakers.
NOT SUITABLE FOR CARS WITH BOSE SPEAKERS.
This interface allows use of cars original steering wheel buttons with compatible aftermarket radios and head units along with supplying a 12v power source to the radio and other optional useful outputs.
Suitable for Audi cars with a quadlock connection on the original radio and rear amplified speakers. This adapter includes an interface for the amplified rear speakers found in most Audi cars that allows the volume levels to be adjusted on the rear speakers to create a balanced sound around the car and avoid interference or external noise being heard.
CANBUS Interface and ISO cables allowing use of original steering wheel control buttons with a new aftermarket radio head-unit including an interface for rear amplified speakers.
NOT SUITABLE FOR CARS WITH BOSE SPEAKERS.
This interface allows use of cars original steering wheel buttons with compatible aftermarket radios and head units along with supplying a 12v power source to the radio and other optional useful outputs:
Steering wheel controls (with compatible radios, requires correct patch lead)
12v ignition (to power the aftermarket radio when the vehicles ignition is on - pre-wired)
Illumination (to change the radio illumination when the vehicles lights are on - pre wired)
Reverse (to switch to a reverse camera view when reverse gear is selected - purple fly lead)
Parking Brake (tells the radio the parking brake is applied, required to use some features on some sets - green fly lead)
Speed Pulse (provides the vehicle speed from the gearbox, needed on some radios with built in GPS - pink fly lead)
Mute (mutes an aftermarket radio in the same vehicle specific circumstances as the original radio, for example when reversing - yellow/white fly lead)
Suitable for Audi cars with a quadlock connection on the original radio and rear amplified speakers. This adapter includes an interface for the amplified rear speakers found in most Audi cars that allows the volume levels to be adjusted on the rear speakers to create a balanced sound around the car and avoid interference or external noise being heard.
Compatible with the following vehicles without a BOSE sound system:
A3 (8P facelift and 8PL) (2006 - 2013)
A4 (B7) (2005 - 2008) except cars with original Concert II single DIN radio
Exeo (2008 - 2013)
IMPORTANT NOTE: This product must be purchased with a suitable patch lead for the type of radio you are fitting. Please select the type of radio being fitted upon purchase to receive the correct parts. A universal option is available if you don't know what radio is being fitted yet, but it requires building as per the instructions provided with it.
Additional information
Weight | .2 kg |
---|---|
Dimensions | 35 × 15 × 5 cm |
Part Category | |
Part Type | Steering Wheel Control Interfaces |
You may also like…
-
Audi A3 (8P) (2003-2013) Single or Double DIN Fascia Adapter Panel (MATT BLACK)
£29.95 -
Audi 2005-2013 car radio Quadlock to ISO adapter cable lead with CANBUS and Amplifier interface (Non-BOSE)
£74.95 -
Male Double Fakra to Male DIN powered aerial antenna adapter cable
£13.00 -
Audi A4 (B6, B7) and Seat Exeo Single or Double DIN Fascia Adapter Panel (MATT BLACK)
£34.99
Reviews