Part Number: ISO-000

An interface cable providing optional useful outputs to make it easier to change an original radio to an aftermarket Chinese set that does not come with a ISO harness and has chassis mounted ISO connectors. This cable is particularly useful to connect a new radio to a steering wheel control interface that has ISO connectors.

The outputs provided are typically as follows:
Parking Brake (green wire)
Reverse Output (pink wire)
Steering Wheel controls (SWC1/KEY1) (Brown wire)
Ground (SWC2/KEY2/SWC Ground/KEY Ground) (Black wire)
This may vary depending on the set fitted. Please check the pinout that is provided with the radio to confirm the exact output or input of each pin.

Compatible with a wide variety of Chinese aftermarket radios with the power ISO connector fully populated without ISO connectors provided with the set.