Reverse Camera and SYNC 2.5 input adaptor kit for Ford Transit - built between 2018 and 2023. The Vehicle will need programming to enable the rear view camera function.

The harness adaptor has square type male and female connectors to connect into the original loom with a RCA Phono camera input to be connected to the camera

Suitable only for the Euro 6 emissions regulations compliant Ford Transit built after 2018 with a SYNC 2.5 colour screen.

NOT COMPATIBLE WITH TRANSIT CUSTOM, TRANSIT COURIER OR TRANSIT CONNECT.

Camera features:

NTSC
LEDs for enhanced night vision
Wide 150° viewing angle
Super CMOS sensor for high quality night video
Dust and waterproof IP68 protection rating
12v power supply

This kit includes the camera, built into a replacement high level brake light. It comes with a converter and power cables, a 10m video cable to run the length of the vehicle and a adaptor cable to add it onto an original SYNC 2.5 head unit.

Please Note: Vehicle Coding required, we recommend this is installed by a professional

While we strive to make the listing as accurate as possible, please check that the dimensions of your brake light matches those shown below as mid-lifespan changes or different body styles may have different sized lights.

How to tell if your Ford Transit is compatible:

Make sure your have a full sized Transit, built after 2018 and not a Transit Connect, Transit Courier or Transit Custom. A full size transit should look like the following image. Please note, this kit is not suitable for box vans, pickups or tipper body styles.

Ford SYNC 1 vehicles as shown below are not compatible with this product:

Ford SYNC 3

SYNC3 was released in 2016, initially on the Fiesta on Zetec level trim and above. SYNC 3 runs on either a 6.5” or 8” touch screen and is quickly distinguishable by having 5 icons at the lower edge of the screen as can be seen below. This kit is not for vehicles with SYNC 3, if you have SYNC 3 then check our other listings for the right kit.

SYNC 3 is now found on a range of vehicles, some have it all built into the screen, while others have a separate module behind the glove box and the screen on the dashboard is only a peripheral input device. If your vehicle is built from 2018 onwards, take great care in deciding if it is equipped with SYNC 3 or SYNC 2.5 before deciding on the products you need. The two look very similar but do not use the same connections for any of the radio functions

Ford SYNC 2.5

In late 2018, coinciding with the facelift of the Transit and Transit Custom, Ford released a very similar system to SYNC 3 which has since been dubbed SYNC 2.5. This is difficult to spot as even in marketing material Ford has not differentiated between the two systems, yet behind the screen they have completely different connections. Unlike the SYNC 3 units with its latched connection (either on the screen or on a separate module) SYNC 2.5 uses two square connections directly to the back of the screen without a latch as seen on the input harness in this kit.

The first way to tell if you have SYNC 2.5 if you haven’t yet removed the screen is to check the number of icons at the bottom of the screen. If it has five then it is SYNC 3, if it has four then next view the ‘About SYNC’ screen in system settings. Here if it shows ‘SYNC 3’ then you have SYNC 3 even if you only have 4 icons, if it shows ‘SYNC’ then you have SYNC 2.5.

If you have SYNC 2.5 on your Ford Transit then this is the correct kit for you.