Vauxhall, Opel, Holden (Pre-2006) steering wheel control interface

£35.99£45.00

Part Number: SWC-ICT-609

Interface and ISO cables allowing use of original steering wheel control buttons with a new aftermarket radio head-unit.

This interface allows use of cars original steering wheel buttons with compatible aftermarket radios and head unit.

Suitable for multiple Vauxhall, Opel and Holden vehicles which have ISO connections for the radios and steering wheel controls on the back of the original radio. Check your car and the original radio fitted before ordering, if in doubt remove the original radio. The man radio connections on compatible cars will be two 8 pin connectors. Cars that are not compatible with have one big quad lock connector with a lever to remove from the back of the radio.

Interface and ISO cables allowing use of original steering wheel control buttons with a new aftermarket radio head-unit.

This interface allows use of cars original steering wheel buttons with compatible aftermarket radios and head unit.

Suitable for multiple Vauxhall, Opel and Holden vehicles which have ISO connections for the radios and steering wheel controls on the back of the original radio. Check your car and the original radio fitted before ordering, if in doubt remove the original radio. The man radio connections on compatible cars will be two 8 pin connectors. Cars that are not compatible with have one big quad lock connector with a lever to remove from the back of the radio. Later cars with the quad lock connector require this CANBUS steering wheel control interface.

Compatible with the following vehicles:

Holden:
Astra (TS) (1998 - 2005)
Barina (XC) (2001 - 2004) (with original CAR200/300/400/CDR500/CCR600 radio)
Vectra (JR, JS) (1998 - 2001)
Vectra (ZC) (2002 - 2007) (with original CAR2003/2004/CCR2006/CDR2005 radio)
Zafira (TT) (2001 - 2005) (with original CAR200/300/400/CDR500/CCR600/CAR2003/2004/CCR2006/CDR2005 radio)

Vauxhall / Opel:
Agila A (2000 - 2004) (with original CAR200/300/400/CDR500/CCR600/CAR2003/2004/CCR2006/CDR2005 radio)
Astra G (1998 - 2004)
Corsa C (2000 - 2004) (with original CAR200/300/400/CDR500/CCR600 radio)
Meriva A (2003 - 2004) (with original CAR2003/2004/CCR2006/CDR2005 radio)
Omega (2000 - 2003)
Signum (2003 - 2004) (with original CAR2003/2004/CCR2006/CDR2005 radio)
Vectra B (1998 - 2001)
Vectra C (2002 - 2004) (with original CAR2003/2004/CCR2006/CDR2005 radio)
Vivaro (2002 - 2006) (with original CAR200/300/400/CDR500/CCR600 radio)
Zafira A (1999 - 2005)

IMPORTANT NOTE: This product must be purchased with a suitable patch lead for the type of radio you are fitting. Please select the type of radio being fitted upon purchase to receive the correct parts. A universal option is available if you don't know what radio is being fitted yet, but it requires building as per the instructions provided with it.

Additional information

Weight .2 kg
Dimensions 35 × 15 × 5 cm
What Type of radio is being fitted?

Alpine, JVC, Kenwood, Pioneer, Sony, Blaupunkt, Chinese resistive programming (2/3 wires), Chinese resistive programming 3.5mm jack, I don't need a patch lead, I don't know (Universal patch lead)

Part Category

Part Type

Steering Wheel Control Interfaces

Reviews

Be the first to review “Vauxhall, Opel, Holden (Pre-2006) steering wheel control interface”

Your email address will not be published. Required fields are marked *