Reverse Camera input adaptor for Ford SYNC 1 systems with a 5" colour screen with part number FORD NAV MFD LOW.

ONLY COMPATIBLE WITH SYNC 1 FORD NAV MFD LOW (2010 - 2019) - NOT ANY OTHER SYNC SYSTEM. Please see below for how to tell which system your car has.

Enables connection of an aftermarket NTSC camera to the vehicles OEM screen. The original FORD NAV MFD LOW screens are 5" in size with built in navigation and a green 4 pin LVDS connection on the rear of the screen.

The Vehicle will need programming to enable the rear view camera function.

The adaptor has an LVDS style male connector with a RCA Phono camera input.

Suitable for the following Ford cars and vans with SYNC 1 FORD NAV MFD LOW original 5" screens

Ford:
B-Max (2012 - 2018)
C-Max (2010 - 2019)
Ecosport (2013 - 2018)
Fiesta Mk7 Facelift (2012 - 2018)
Focus Mk3 (2011 - 2018)
Kuga (2013 - 2019)
Ranger (2011 - 2015)
Transit Connect (2014 - 2019)
Transit Courier (2014 - 2019)
Transit Custom (2013 - 2018)

Please Note: Vehicle Coding required.

HOW TO TELL IF YOU HAVE SYNC 1 FORD NAV MFD LOW

Ford SYNC 1 vehicles with a colour 5" screen as shown below are usually compatible if they have satellite navigation built in. If your screen does not have satellite navigation then it will not be compatible.

If in doubt, remove the screen. On the build sticker on the underside it should read FORD NAV MFD LOW and on the back will be a green LVDS connection with 4 pins which this harness connects to.