Reverse Camera input adaptor for Ford SYNC 2.5 systems.

ONLY COMPATIBLE WITH SYNC 2.5 (2018 onwards) - NOT ANY OTHER SYNC SYSTEM. Please see below for how to tell which system your car has.

Enables connection of an aftermarket NTSC camera to the vehicles OEM screen.

The Vehicle will need programming to enable the rear view camera function.

The adaptor has square block style male and female connectors with a RCA Phono camera input.

Suitable for the following Ford cars and vans, plus others with SYNC 2.5 in car entertainment.

Ford:
Ecosport 2nd Gen (2018 >)
Fiesta Mk8 (2017 >)
Focus Mk4 (2018 >)
Galaxy MK4 (CD390) (2018 - 2022)
Kuga 3rd Gen (2019 >)
Mondeo Mk5 (2018 - 2022)
Puma (Crossover) (2019 >)
Transit Mk8 Facelift (2018 >)
Transit Connect MK2 Facelift (2019 >)
Transit Custom MK1 Facelift (2018 >)

Please Note: Vehicle Coding required.

HOW TO TELL WHAT SYNC SYSTEM YOUR FORD IS FITTED WITH

Ford SYNC 1 and SYNC 2 vehicles with screens as shown below are not compatible with this product:

Ford SYNC 3

This product is not compatible with SYNC 3. SYNC 3 runs on either a 6.5” or 8” touch screen and is quickly distinguishable by having 5 icons at the lower edge of the screen as can be seen below. SYNC 3 uses a latched connection on a separate module or on the back of the screen. If you have SYNC 3, the correct harness can be found in our other items.

If your vehicle is built from 2018 onwards, take great care in deciding if it is equipped with SYNC 3 or SYNC 2.5 before deciding on the products you need. The two look very similar but do not use the same connections for any of the radio functions.

Ford SYNC 2.5

This harness is only compatible with SYNC 2.5

In late 2018, coinciding with the facelift of the Transit and Transit Custom, Ford released a very similar system to SYNC 3 which has since been dubbed SYNC 2.5. This is difficult to spot as even in marketing material Ford has not differentiated between the two systems, yet behind the screen they have completely different connections. Unlike the SYNC 3 units with its latched connection (either on the screen or on a separate module) SYNC 2.5 uses two square connections directly to the back of the screen without a latch.

The first way to tell if you have SYNC 2.5 if you haven’t yet removed the screen is to check the number of icons at the bottom of the screen. If it has five then it is SYNC 3, if it has four then next view the ‘About SYNC’ screen in system settings. Here if it shows ‘SYNC 3’ then you have SYNC 3 even if you only have 4 icons, if it shows ‘SYNC’ then you have SYNC 2.5.

If still in doubt, remove the screen and check the connections on the rear.